top of page

A Microplex logiJET T6-2 nyomtatóval akár 6 hüvelyk széles anyagokat is megbízhatóan és gyorsan nyomtathat.

A DIN A5 formátumú vonalkódcímkék nagyobb konténerekhez, hordócímkézéshez , szállításhoz és raktározáshoz optimális sebességgel nyomtathatók. A rugalmas Microplex vezérlő nagy teljesítménye mindenkor optimális nyomtatási sebességet biztosít.

Több mint 40 nyomtatónyelv (emuláció), mint például PCL5, Kyocera Prescribe, ZPL, IGP és még sok más támogatott.

Az opcionális GPIO interfész megkönnyíti a logisztikai rendszerekbe való integrációt.

Az opcionális kiegészítő modulok, mint például a vágó, a hámozó és a bemutató modulok rugalmasan használhatóvá teszik a logiJET T6-2 készüléket.

 

Print Engine

 

Print technology Thermal transfer/direct thermal harmonic

(history-controlled flat head technology)

Controller MPC 8.x

Print speed up to 150 mm/s

up to 6 inch/s

Print resolution 300 dpi x 300 dpi

Lifetime print head Transfer: up to 50.000 m,

Direct: up to 25.000 m

Power supply 100 - 240 VAC, 50/60 Hz

Power consumption 3,3 A

Dimensions (WxDxH in mm) 345 x 516 x 285

Weight 17 kg (without options)

Environment temperature 5 - 40°C

Relative humidity 20 - 85 % (rel., non-condensing)

Interfaces

USB

Ethernet-Interface

10/100 MBit, bi-directional (TCP/IP)

Optional* IEEE 1284 (Centronics),

RS232, RS422

WIFI: IEEE 802.11 n/g/b, WEP avec 64 et 128 Bit,

WPA/WPA2, WPA-PSK/WPA2-PSK

Memory RAM: 256 MB

Flash: 256 MB

 

MPC 8.x High-End Print-Controller


Emulations
MICROPLEX IDOL, AGFA Reno, LN03+, BULL-MP6090, IGP/PGL, Datamax, Etimark MP-1220, TEC Bx72, TEC
B6xx, LDC, ZPL II, EPL2, Intermec Direct Protocol, IER Command, cab, Godex EZPL, Diablo 630, IBM Proprinter,
Epson FX-80 (ESC/P), MT-600/MT40, IDS, ANSI Genicom, TIFF, HP Designjet, XML (SAP® RFID), CUPS Raster
Optional Emulations
HP-PCL5/ HPGL, μ-Postscript, CODE-V (Magnum), XEROX XES, KODESCRIPT+, Prescribe/PSB 2, Labelpoint, ,
IPDS, AEA, PDF Direct Printing** (more emulations on request)
Barcodes
Codebar, Code39, MSI, PDF417, Interleaved 2/5, Interleaved 2/5 (3-Stroke Datalogic),
Interleaved 2/5 (3-Stroke Matrix), EAN-8, 13, 128, Add-On-Codes, Code11, Code93, Code 128, UPC-A, UPC-E
Optional Barcodes (Barcode 2)
Datamatrix, Maxi-Code, QR Code, Aztec-Code, USD-5 (more barcodes on request)
Additional functions


Network capabilities authentication standard IEEE 802.1X
Intelligent barcode generation on-the-fly in the printer
Format splitting in several subformats by command


Optional functions
Integrated form management (RFM)
Forms and fonts can be stored in the flash memory and can be accessed when needed.
Status-Out
gives notice of each correctly printed page via interface. Further features can be found in the manual.
Programmable GPIO-Interface (SPS-Control)
EMBEDDED INTELLIGENCE – Enabling two-way communication between printer and a PLC.
Integration of the printer into production lines is possible, controlled by GPIO-interface
Customer / Application specific modifications possible.

 

Printable Media


Size
Width max. 178 mm
(165 mm withCutter)
printable width 168 mm
roll diameter max. 203 mm,
core diameter 1,5 - 3 inch (38,1 - 76,2 mm)
Paper thickness 0,06 mm - 0,25 mm


Thermal transfer ribbon
roll diameter max. 76 mm
Core diameter 1 inch (25.4 mm)
Ribbon length max. 450 m
Coated side inside or outside
Ribbon width 60 - 174 mm

 

Paper Path


Input
Continuous internal: from roll
external: e.g. fanfold
sensor for black mark and label gap
(reflection and transmissive)
Output
Single/Job tear-off
Optional
Continuous internal Peeler / Rewinder
Single peel-off, Cutter
Job cutter
Option RFID
Frequency Range
865.600-867.600 MHz (ETSI EN 302 208)
RF Power
programmable in 15 levels (1dB step) from 9dBm to
23dBm (from 8mW to 200mW) conducted
Standard Protocols EPC C1 G2 / ISO18000-6C
Features read/write/verify (void)
Registration of antenna position
automatic (depending on antenna design)

 

logiJET T6-2 Thermal Label Printer

    bottom of page